Portable Cold Cutting Pneumatic Pipe Beveler 26 - 79mm Processing Range
Product Introduction
Beveling tools of BPP inner mounted pipe beveling machines can bevel different angles under customer requirement. Our tools are made of high-speed steel and applicable to process all types of carbon steel. Therefore, our BPP ID mounted pipe beveling machines are your best choice for processing small-diameter pipes from12.5mm to 240mm ID. up to a wall thickness of 18mm.
Application
BPP series of pipe beveling machines are widely applied in boiler plants, pressure vessels, heat exchangers, power plant, nuclear power, petroleum, chemical engineering, natural gas, pharmacy, pipe prefabrication plant, pipeline installation engineering, rush-repair work, etc.
Technical Parameters
Tools
| Name |
Quantity |
Description |
| Flain tool |
1 |
Flain end face(0° ) |
| Bevel tool |
1 |
Chamfer(30° ) |
| Bevel tool |
1 |
Chamfer(37. 5° ) |
| Bevel tool |
1 |
Chamfer(15° ) |
| Bevel tool |
1 |
Chamfer(37° ) |
The tools attached to the products upon delivery are all made of high-speed steel and applicable to process all types of carbon steel. Their types are the five tools in the above diagram.
Installation & Processing
■ During installation, the tools should not touch the feed spindle and the expansion block.
■ The expansion block should not be stretched too deep into the pipe and keep about 20 mm from the pipe end face.
■ During processing, control the feed speed based on cutting conditions to avoid damage of blades and parts in the machine; In case of vibration of the machine or uneven bevel face, timely tighten the expansion hand wheel to prevent the looseness of the expansion, which may cause damages to the machine.
During installation, the tools should not touch the feed spindle and the expansion block.
■ The expansion block should not be stretched too deep into the pipe and keep about 20 mm from the pipe end face.
■ During processing, control the feed speed based on cutting conditions to avoid damage of blades and parts in the machine; In case of vibration of the machine or uneven bevel face, timely tighten the expansion hand wheel to prevent the looseness of the expansion, which may cause damages to the machine.
Safety Instructions
Safety is our priority when pipe beveling machines are designed, and ergonomics is also taken into consideration to ensure product safety and reliability.
■ Before operation, please carefully check for loose connections, blocked rotating parts, or any damage and other factors that may affect the operation or lead to hidden dangers.
■ The applicable scope of the machine should be strictly followed for pipe processing.
■ Do not touch electric switches and buttons with wet hands to avoid electric shock.
■ Before operation, ensure the operators are kept away from any live part such as motors and cables.
■ The machines should not be operated outdoors when it rains.
■ Before disassembly or replacement of cutting tools, please ensure the machines are cooled down to the safety temperature to prevent from burning.
■ It is strictly forbidden to transform the machines or replace accessories with those not produced by the original manufacturer without approval.
Product Tags:
|
|
Portable Cold Cutting Pneumatic Pipe Beveler 26 - 79mm Processing Range Images
|
